I've been working with a Micron BGA eMMC chip and prototyping a communication scheme with the eMMC chip inside an adapter board that connects to the G ...
I am currently working on a simple operating system (Github: https://github.com/Nutty000/PlanetOS) I would like to make the os work on real hardware, ...
I'm working on an ESP32 platform with IDF 4.1, using code like this: I had to add the bit where invalid_ctr is incremented, because I started getti ...
When trying to format a flash drive to FAAT32 by using macOS, Bug Sur, Disk Utility only shows the APFS. ...
This code look for jpeg in card.raw When i run above code on linux, its running correctly. but on windows code reads only first three block of 512 b ...
I have a very old car radio that can play music from USB fash drives when they are formatted in FAT16 or FAT32, but it sorts files by the short 8.3 fi ...
I tried to analysis the format of FAT32 to use it later in a project containing SD card with FAT32 and a MCU but when I read the data of the SD Card w ...
I have 7 files (approximately 4.7 GB each one) and I want to merge them into a single file. I tried: and I got this: ...
i have two questions about FAT32 , The first if i want to format a partition with FAT32 using 32KB block size i think the maximum partition size i ca ...
I'm developing an application which uses some large binary files - in the range 1GB - 25GB. The application will run primarily on servers and possibly ...
Firstly I made my pendrive as bootable and after finished the stuff i formatted it as FAT32 and feed the songs into it , then i plugged into mp3 playe ...
I am having issue converting a new SanDisk 128GB microSD card from ExFAT to FAT32 Here is the mounted partition First I unmount: Then I eras ...
I am using macOS Mojave 10.14.6. I am trying to re-format my USB to FAT. I am getting this error MBRFormat does not appear to be a valid volume name f ...
since there is no tool on mac to sort a USB-stick (FAT32) by name to play music files in a car that cannot sort the files by itself, i want to create ...
I have been building a program to access files on a Fat32 micro sd card. However, when I run my program or open my SD card with a hex viewer to the ro ...
I recently added a FAT32 partition table to my bootloader and now BIOS won't recognize it as a bootable MBR. I believe the binary is 512 Bytes and the ...
I am working on Embedded Linux System which mounts a SDCARD ( formatted as FAT32) and writes about 500KB of Data per second continuously . Now to han ...
I am trying to write bare metal FAT32 file system driver on RPI 3B. I am able to read FAT sectors and root directory sectors using emmc driver. I hav ...
'uname -a' on my machine gives: Linux ct-lt-966 4.9.0-8-amd64 #1 SMP Debian 4.9.144-3.1 (2019-02-19) x86_64 GNU/Linux Currently the filesystem of my ...
I am writing an operating system, therefore I need to implement a filesystem. So I chose FAT32. I was looking up FAT entry values and for the values i ...