I am having a lot of trouble when it comes to flash erasing on the dsPIC33EP64GP503 and I am hoping someone on here will be able help. I am wanting t ...
I am having a lot of trouble when it comes to flash erasing on the dsPIC33EP64GP503 and I am hoping someone on here will be able help. I am wanting t ...
What would be the best practice for writing to the flash on a regular basis. Considering the hardware I am working on is supposed to have 10 to 20 yea ...
I bought an RP2040 board with 16MB QSPI Flash Memory in the board: The Flash Memory w25q128 is connected to QSPI dedicated pins of the RP2040: I ...
I am fairly new to STM32 but worked on Microchip MPASM and C for a long time. My code declares a two dimensional array in an include file to be store ...
I got my hands on an already deployed yocto system (yocto 2.6.2 - thud) on a board with a NXP i.MX 6UL Cortex-A7. My only possible access at the momen ...
I'm working with flex to generate custom language. I'm wondering if there is a possibility to add in some way a setting that will change a part of gen ...
I'm aware that on some STM32 boards, they come with a built in bootloader in their ROM. Quoting from STM32 Application Note The bootloader is stor ...
I am using lpc54016 on a custom board with winbond w25q32jvss as external SPI flash memory. Can I use winbond w25q32jvss for storing the code memory a ...
I'm designing a software that manages configuration file. Generally, it maintains two copies of the configuration file, one in RAM and one in flash m ...
I need to change my flash jump address when I update firmware. I am using sm32h750 microcontroller, I can change the application code start address wi ...
I am trying to design a UART bootloader for STM32G474RE microcontroller. I am having problem in Flash erasing part of the code. Before designing bootl ...
I have an application where I must save chunks of data to flash memory. The flash memory used: https://datasheet.datasheetarchive.com/originals/dk/DKD ...
I've been working with a Micron BGA eMMC chip and prototyping a communication scheme with the eMMC chip inside an adapter board that connects to the G ...
I'm developping a driver for a QSPI Serial Flash connected to a STM32H753. I'm used to SPI but not so much to QSPI. I don't understand the benefit of ...
I am working on STM32F429NI Evaluation board, I have a code to blink the led. I want the blink led code to be present in external nor flash and the bo ...
Does ftl have private storage space that is not flash? If not, how does ftl store those meta data while avoiding wear leveling. Actually I don’t kno ...
I read some where that in stm32 .bin file reflects exactly as it is in flash but when I compare my flash content(by using cube Programmer) & .bin ...
I am trying to do a bank swap with the ST32 H743ZI2. I wasted much of time to fix it but I didn't get it. Maybe because I'm new in STM32 controllers. ...
I have some questions regarding the flash memory with a dspic33ep512mu810. I'm aware of how it should be done: set all the register for address, latch ...
During the flash of the code on the target, I am storing data into flash memory at a specific adress and I update (sometimes) this data while the code ...