I have LoRaWAN IoT devices from the TTN network which I have brought to Azure IoT Central. I would like to get specific data inside the JSON in order ...
I have LoRaWAN IoT devices from the TTN network which I have brought to Azure IoT Central. I would like to get specific data inside the JSON in order ...
I'm trying a setup for LoRa with a FiPy board as a gateway/forwarder and a Raspberry Pi Pico with the Waveshare sx1262-686m hat for LoRa. The FiPy is ...
I am using 2 LHT65N sensors, a Wisgate Edge Lite 2 Gateway, forwarding the payload to a Mosquitto broker, and to display data I am using mqtt.js. I a ...
I have a TEKTELIC smart room sensor connected to AWS IoT Core for Lambda. The destination publishes to a topic. In the MQTT test client I get a nicely ...
I have an Eastron SDM630 LoRaWan meter where the AppEUI, DevEUI, and AppKey have been correctly entered, and where the meter read-out confirms that it ...
I have a simple question : Using node-red, I have a result in this format : [{}], But I want in this {}. could you please help me ? thanks in advan ...
I'm looking for a solutions to create my own LoRaWAN gateway who can aslo be the server. I would like to get data from any classic LoRaWAN sensor to ...
I am currently connecting to Wanesy Management Center. Every device provides me data with a payload. I can access data such as: I have this data ...
I have been trying to program an STM32WL55JC1 microcontroller on a LoRa-E5-Mini from Seeed studio to be a LoRaWAN endnode and relay airpressure data f ...
I have a system based on the LoRaWAN network. It gets the information from the Base64 encoded gateway. I need to decode it from NwkSKey and AppSKey in ...
I created a packet-forwarding script on my Raspberry Pi LoRa gateway to forward packets to a broker through MQTT using the Paho mqtt Python library. I ...
I'm trying to run LoRaWAN 1.0.4 certification tests on my mDot using LCTT Pre-testing Tool. I use the latest Dot-AT-Firmware and libmDot v4.0.1. Loo ...
I want to add USB MSC (Mass Storage Class, so USB storage drive) functionality to my Murata B-L072Z-LRWAN1 board. For this I have used the most recent ...
I searched about the Lora Network, in it's architecture i found every where the same thing that LoRa Gateway is connected to TTN Server. So i want to ...
i have a byte-array sensor_id = [bytes[36],bytes[35],bytes[34],bytes[33]] it holds the following hexadecimals 0x69, 0x72, 0x33, 0x88 I need to mer ...
I try to set up an end node in LoRaWAN. I use the board b_l072z_lrwan1 from ST Microelectronics with Zephyr OS. I use PlatformIO on VSCode. I use the ...
I am trying to understand how the join-accept message is handled on the microcontroller side. In the image below the captured packet from the network ...
I am doing my FYP and for this I need some information: Is it possible to connect a mobile with a LoRa Network via cellular SIM? Actually, I wa ...
I used different new components and it did not change anything. I also added a 16 Mhz crystal to have a more precise clock. it made things a little be ...
I am currently doing a simulation, in which each second has 200k points. I want to send this in real time as much as possible with very minimal delay. ...