[英]C++ Serial communication with Arduino
我正在一个项目,该项目在Windows PC和Arduino Uno卡之间进行串行通信。
在C ++代码中,我有一个SerialClass.h和一个Serial.cpp
我的问题是我遇到了编译器错误:函数中未定义标识符“ SP”
void Serial::SendtoArd(int val, int var)
{
if (SP->IsConnected())
{
bool writeData = false;
writeData = SP->WriteData("test",4);
}
我知道是否在此功能中定义了SP可以摆脱此故障,但是我不想在该功能中激活串行端口。 我想在此功能中激活串口
bool Serial::OpenPtoArd()
{
Serial* SP = new Serial("\\\\.\\COM3"); // adjust as needed
if (SP->IsConnected())
{
bool status = true;
}
}
并在我的应用程序运行期间一直保持活动状态。
有人可以帮我从这里出去吗?
这是SerialClass.h
#ifndef SERIALCLASS_H_INCLUDED
#define SERIALCLASS_H_INCLUDED
#define ARDUINO_WAIT_TIME 2000
#include <windows.h>
#include <stdio.h>
#include <stdlib.h>
class Serial
{
private:
//Serial comm handler
HANDLE hSerial;
//Connection status
bool connected;
//Get various information about the connection
COMSTAT status;
//Keep track of last error
DWORD errors;
public:
//Initialize Serial communication with the given COM port
Serial(char *portName);
//Close the connection
~Serial();
//Read data in a buffer, if nbChar is greater than the
//maximum number of bytes available, it will return only the
//bytes available. The function return -1 when nothing could
//be read, the number of bytes actually read.
int ReadData(char *buffer, unsigned int nbChar);
//Writes data from a buffer through the Serial connection
//return true on success.
bool WriteData(char *buffer, unsigned int nbChar);
//Check if we are actually connected
bool IsConnected();
bool OpenPtoArd();
void SendtoArd(int val, int var);
};
这是Serial.cpp
#endif // SERIALCLASS_H_INCLUDED
#include "stdafx.h"
#include "SerialClass.h"
#define LEN 1
bool status = false;
Serial::Serial(char *portName)
{
//We're not yet connected
this->connected = false;
//Try to connect to the given port throuh CreateFile
this->hSerial = CreateFile(portName,
GENERIC_READ | GENERIC_WRITE,
0,
NULL,
OPEN_EXISTING,
FILE_ATTRIBUTE_NORMAL,
NULL);
//Check if the connection was successfull
if (this->hSerial == INVALID_HANDLE_VALUE)
{
//If not success full display an Error
if (GetLastError() == ERROR_FILE_NOT_FOUND) {
//Print Error if neccessary
printf("ERROR: Handle was not attached. Reason: %s not available.\n", portName);
}
else
{
printf("ERROR!!!");
}
}
else
{
//If connected we try to set the comm parameters
DCB dcbSerialParams = { 0 };
//Try to get the current
if (!GetCommState(this->hSerial, &dcbSerialParams))
{
//If impossible, show an error
printf("failed to get current serial parameters!");
}
else
{
//Define serial connection parameters for the arduino board
dcbSerialParams.BaudRate = CBR_9600;
dcbSerialParams.ByteSize = 8;
dcbSerialParams.StopBits = ONESTOPBIT;
dcbSerialParams.Parity = NOPARITY;
//Set the parameters and check for their proper application
if (!SetCommState(hSerial, &dcbSerialParams))
{
printf("ALERT: Could not set Serial Port parameters");
}
else
{
//If everything went fine we're connected
this->connected = true;
//We wait 2s as the arduino board will be reseting
Sleep(ARDUINO_WAIT_TIME);
}
}
}
}
Serial::~Serial()
{
//Check if we are connected before trying to disconnect
if (this->connected)
{
//We're no longer connected
this->connected = false;
//Close the serial handler
CloseHandle(this->hSerial);
}
}
int Serial::ReadData(char *buffer, unsigned int nbChar)
{
//Number of bytes we'll have read
DWORD bytesRead;
//Number of bytes we'll really ask to read
unsigned int toRead;
//Use the ClearCommError function to get status info on the Serial port
ClearCommError(this->hSerial, &this->errors, &this->status);
//Check if there is something to read
if (this->status.cbInQue>0)
{
//If there is we check if there is enough data to read the required number
//of characters, if not we'll read only the available characters to prevent
//locking of the application.
if (this->status.cbInQue>nbChar)
{
toRead = nbChar;
}
else
{
toRead = this->status.cbInQue;
}
//Try to read the require number of chars, and return the number of read bytes on success
if (ReadFile(this->hSerial, buffer, toRead, &bytesRead, NULL) && bytesRead != 0)
{
return bytesRead;
}
}
//If nothing has been read, or that an error was detected return -1
return -1;
}
bool Serial::WriteData(char *buffer, unsigned int nbChar)
{
DWORD bytesSend;
//Try to write the buffer on the Serial port
if (!WriteFile(this->hSerial, (void *)buffer, nbChar, &bytesSend, 0))
{
//In case it don't work get comm error and return false
ClearCommError(this->hSerial, &this->errors, &this->status);
return false;
}
else
return true;
}
bool Serial::IsConnected()
{
//Simply return the connection status
return this->connected;
}
void readme()
{
Serial serial("COM3");
char c[LEN + 1];
int numBytes = 0;
while (true)
{
numBytes = serial.ReadData(c, LEN);
if (numBytes != -1)
{
// Terminate the string if we want to use c variable as a string
c[numBytes] = 0;
break;
}
}
}
bool Serial::OpenPtoArd()
{
Serial* SP = new Serial("\\\\.\\COM3"); // adjust as needed
if (SP->IsConnected())
{
bool status = true;
}
}
void Serial::SendtoArd(int val, int var)
{
if (SP->IsConnected())
{
bool writeData = false;
writeData = SP->WriteData("test",4);
}
}
此代码的问题
bool Serial::OpenPtoArd()
{
Serial* SP = new Serial("\\\\.\\COM3"); // adjust as needed
if (SP->IsConnected())
{
bool status = true;
}
}
是您正在创建新的Serial
,然后在函数退出时丢失指向该Serial
的指针。 如果你想等功能,能够访问它,你需要的SP
变量是外 OpenPtoArd()
函数。
您可以(应该?)使它成为您的类的成员(顺便说一句将与Arduino的Serial
类冲突-叫它别的东西!),或使其成为全局变量: 将以下行放在文件顶部附近:
YourSerialClass *SP = NULL;
请注意,我将变量设置为NULL
。 您的其他代码需要知道SP
端口是否已创建-如果尚未创建,则不要使用它:
if ((SP!=NULL) && (SP->IsConnected()) {
... do SP things
} // if
声明:本站的技术帖子网页,遵循CC BY-SA 4.0协议,如果您需要转载,请注明本站网址或者原文地址。任何问题请咨询:yoyou2525@163.com.