RISC-V跳转到中断处理程序

Question

您好，我在写一个小的内核，以更好地了解RISC-V。 到目前为止，我设法使用UART并设置了一个简单的内存管理器。 为了能够解析用户输入，我设置了一个中断处理程序并将其地址设置为MTVEC。 然后我在MSTATUS和MIE中启用了中断。 之后，我通过mmio寄存器设置MTIMECMP，并与WFI永远循环（RISC-V等待中断指令）。 然后我注意到MIP包含了预期的0x8（这意味着机器模式定时器中断待处理）。 我的代码没有跳到MTVEC的唯一问题。 我怎么了 最好的问候，Serge Teodori

资源：

void mtrap(){
    uint8_t txt[0x100];
    struct uart_t uart = { .reg = (uint32_t*) 0x10013000 };

    stringFormat(txt, 0x100, "machine trap\r\n");
    uart_write(&uart, txt, 0x100);
}

void main(){
    uint8_t txt[0x100];
    uint64_t mvendorid, marchid, mimpid, mhartid, mstatus, misa, mtvec, mie, mip, mcause;
    struct clint_t clint = { .addr = 0x2000000 };
    struct plic_t plic = { .reg = (uint32_t*) 0x0c000000 };
    struct uart_t uart = { .reg = (uint32_t*) 0x10013000 };

    asm volatile ("csrr %[reg], mvendorid" : [reg] "=r" (mvendorid));
    asm volatile ("csrr %[reg], marchid" : [reg] "=r" (marchid));
    asm volatile ("csrr %[reg], mimpid" : [reg] "=r" (mimpid));
    asm volatile ("csrr %[reg], mhartid" : [reg] "=r" (mhartid));
    asm volatile ("csrr %[reg], misa" : [reg] "=r" (misa));

    // block all harts except hart 0
    if(mhartid)
        for(;;){ asm volatile ("wfi"); }

    mm_init(0x84000000, 0x1bffe000); // addr: 2GB + 64MB & size: 512MB - 64MB - 8KB
    uart_init(&uart);

    stringFormat(txt, 0x100, "mvendorid=%x, marchid=%x, mimpid=%x, mhartid=%x, misa=%x\r\n", mvendorid, marchid, mimpid, mhartid, misa);
    uart_write(&uart, txt, 0x100);

    // check if pending interrupt
    asm volatile ("csrr %[reg], mie" : [reg] "=r" (mie));
    asm volatile ("csrr %[reg], mip" : [reg] "=r" (mip));
    asm volatile ("csrr %[reg], mstatus" : [reg] "=r" (mstatus));
    asm volatile ("csrr %[reg], mcause" : [reg] "=r" (mcause));
    stringFormat(txt, 0x100, "mie=%x, mip=%x, mstatus=%x, mcause=%x\r\n", mie, mip, mstatus, mcause);
    uart_write(&uart, txt, 0x100);

    // set interrupt function or vector
    asm volatile ("csrw mtvec, %[reg]" : : [reg] "r" (riscv_mtrap));
    asm volatile ("csrr %[reg], mtvec" : [reg] "=r" (mtvec));
    stringFormat(txt, 0x100, "mtvec=%x\r\n", mtvec);
    uart_write(&uart, txt, 0x100);

    // enable machine mode interrupts
    asm volatile ("csrs mstatus, 0x8");

    // enable interrupts
    asm volatile ("csrs mie, 0x8");

    // check if pending interrupt
    asm volatile ("csrr %[reg], mie" : [reg] "=r" (mie));
    asm volatile ("csrr %[reg], mip" : [reg] "=r" (mip));
    asm volatile ("csrr %[reg], mstatus" : [reg] "=r" (mstatus));
    asm volatile ("csrr %[reg], mcause" : [reg] "=r" (mcause));
    stringFormat(txt, 0x100, "mie=%x, mip=%x, mstatus=%x, mcause=%x\r\n", mie, mip, mstatus, mcause);
    uart_write(&uart, txt, 0x100);

    // enable timer and wait for x cycles
    clint_set_hart_timer(&clint, mhartid, 10);
    for(mip = 0; mip < 0x100; mip++){}

    // check if pending interrupt
    asm volatile ("csrr %[reg], mie" : [reg] "=r" (mie));
    asm volatile ("csrr %[reg], mip" : [reg] "=r" (mip));
    asm volatile ("csrr %[reg], mstatus" : [reg] "=r" (mstatus));
    asm volatile ("csrr %[reg], mcause" : [reg] "=r" (mcause));
    stringFormat(txt, 0x100, "mie=%x, mip=%x, mstatus=%x, mcause=%x\r\n", mie, mip, mstatus, mcause);
    uart_write(&uart, txt, 0x100);

    for(;;){ asm volatile ("wfi"); }
}

asm：

    .align 4
    .globl riscv_mtrap
    .type riscv_mtrap, @function
riscv_mtrap:
    j mtrap
    mret

输出：

mvendorid=0, marchid=0, mimpid=0, mhartid=0, misa=800000000014112d
mie=0, mip=0, mstatus=0, mcause=0
mtvec=80000010
mie=8, mip=0, mstatus=8, mcause=0
mie=8, mip=80, mstatus=8, mcause=0

Answer 1

发现错误。 asm volatile ("csrs mie, 0x8"); 启用软件中断。 我不得不将asm volatile ("csrw mie, 0x80"); ，现在可以使用了。