Two part question:
Here's the code that I found online for prime factorization [NOTE: This code is incorrect. See Stefan's answer below for better code.] :
n = 600851475143
i = 2
while i * i < n:
while n % i == 0:
n = n / i
i = i + 1
print(n)
#takes about ~0.01secs
i = 1
while i < 100:
i += 1
#takes about ~3secs
This question was the first link that popped up when I googled "python prime factorization"
. As pointed out by @quangpn88, this algorithm is wrong (!) for perfect squares such as n = 4, 9, 16, ...
However, @quangpn88's fix does not work either, since it will yield incorrect results if the largest prime factor occurs 3 or more times, eg, n = 2*2*2 = 8
or n = 2*3*3*3 = 54
.
I believe a correct, brute-force algorithm in Python is:
def largest_prime_factor(n):
i = 2
while i * i <= n:
if n % i:
i += 1
else:
n //= i
return n
Don't use this in performance code, but it's OK for quick tests with moderately large numbers:
In [1]: %timeit largest_prime_factor(600851475143)
1000 loops, best of 3: 388 µs per loop
If the complete prime factorization is sought, this is the brute-force algorithm:
def prime_factors(n):
i = 2
factors = []
while i * i <= n:
if n % i:
i += 1
else:
n //= i
factors.append(i)
if n > 1:
factors.append(n)
return factors
Ok. So you said you understand the basics, but you're not sure EXACTLY how it works. First of all, this is a great answer to the Project Euler question it stems from. I've done a lot of research into this problem and this is by far the simplest response.
For the purpose of explanation, I'll let n = 20
. To run the real Project Euler problem, let n = 600851475143
.
n = 20
i = 2
while i * i < n:
while n%i == 0:
n = n / i
i = i + 1
print (n)
This explanation uses two while
loops. The biggest thing to remember about while
loops is that they run until they are no longer true
.
The outer loop states that while i * i
isn't greater than n
(because the largest prime factor will never be larger than the square root of n
), add 1
to i
after the inner loop runs.
The inner loop states that while i
divides evenly into n
, replace n
with n
divided by i
. This loop runs continuously until it is no longer true. For n=20
and i=2
, n
is replaced by 10
, then again by 5
. Because 2
doesn't evenly divide into 5
, the loop stops with n=5
and the outer loop finishes, producing i+1=3
.
Finally, because 3
squared is greater than 5
, the outer loop is no longer true
and prints the result of n
.
Thanks for posting this. I looked at the code forever before realizing how exactly it worked. Hopefully, this is what you're looking for in a response. If not, let me know and I can explain further.
It looks like people are doing the Project Euler thing where you code the solution yourself. For everyone else who wants to get work done, there's the primefac module which does very large numbers very quickly:
#!python
import primefac
import sys
n = int( sys.argv[1] )
factors = list( primefac.primefac(n) )
print '\n'.join(map(str, factors))
For prime number generation I always use Sieve of Eratosthenes
:
def primes(n):
if n<=2:
return []
sieve=[True]*(n+1)
for x in range(3,int(n**0.5)+1,2):
for y in range(3,(n//x)+1,2):
sieve[(x*y)]=False
return [2]+[i for i in range(3,n,2) if sieve[i]]
In [42]: %timeit primes(10**5)
10 loops, best of 3: 60.4 ms per loop
In [43]: %timeit primes(10**6)
1 loops, best of 3: 1.01 s per loop
You can use Miller-Rabin primality test to check whether a number is prime or not. You can find its Python implementations here .
Always use timeit
module to time your code, the 2nd one takes just 15us
:
def func():
n = 600851475143
i = 2
while i * i < n:
while n % i == 0:
n = n / i
i = i + 1
In [19]: %timeit func()
1000 loops, best of 3: 1.35 ms per loop
def func():
i=1
while i<100:i+=1
....:
In [21]: %timeit func()
10000 loops, best of 3: 15.3 us per loop
Isn't largest prime factor of 27 is 3 ?? The above code might be fastest,but it fails on 27 right ? 27 = 3*3*3 The above code returns 1 As far as I know.....1 is neither prime nor composite
I think, this is the better code
def prime_factors(n):
factors=[]
d=2
while(d*d<=n):
while(n>1):
while n%d==0:
factors.append(d)
n=n/d
d+=1
return factors[-1]
"""
The prime factors of 13195 are 5, 7, 13 and 29.
What is the largest prime factor of the number 600851475143 ?
"""
from sympy import primefactors
print primefactors(600851475143)[-1]
def find_prime_facs(n):
list_of_factors=[]
i=2
while n>1:
if n%i==0:
list_of_factors.append(i)
n=n/i
i=i-1
i+=1
return list_of_factors
Another way of doing this:
import sys
n = int(sys.argv[1])
result = []
for i in xrange(2,n):
while n % i == 0:
#print i,"|",n
n = n/i
result.append(i)
if n == 1:
break
if n > 1: result.append(n)
print result
sample output :
python test.py 68
[2, 2, 17]
If you are looking for pre-written code that is well maintained, use the function sympy.ntheory.primefactors from SymPy .
It returns a sorted list of prime factors of n
.
>>> from sympy.ntheory import primefactors
>>> primefactors(6008)
[2, 751]
Pass the list to max()
to get the biggest prime factor: max(primefactors(6008))
In case you want the prime factors of n
and also the multiplicities of each of them, use sympy.ntheory.factorint .
Given a positive integer
n
,factorint(n)
returns a dict containing the prime factors ofn
as keys and their respective multiplicities as values.
>>> from sympy.ntheory import factorint
>>> factorint(6008) # 6008 = (2**3) * (751**1)
{2: 3, 751: 1}
The code is tested against Python 3.6.9 and SymPy 1.1.1.
The code is wrong with 100. It should check case i * i = n:
I think it should be:
while i * i <= n:
if i * i = n:
n = i
break
while n%i == 0:
n = n / i
i = i + 1
print (n)
My code:
# METHOD: PRIME FACTORS
def prime_factors(n):
'''PRIME FACTORS: generates a list of prime factors for the number given
RETURNS: number(being factored), list(prime factors), count(how many loops to find factors, for optimization)
'''
num = n #number at the end
count = 0 #optimization (to count iterations)
index = 0 #index (to test)
t = [2, 3, 5, 7] #list (to test)
f = [] #prime factors list
while t[index] ** 2 <= n:
count += 1 #increment (how many loops to find factors)
if len(t) == (index + 1):
t.append(t[-2] + 6) #extend test list (as much as needed) [2, 3, 5, 7, 11, 13...]
if n % t[index]: #if 0 does else (otherwise increments, or try next t[index])
index += 1 #increment index
else:
n = n // t[index] #drop max number we are testing... (this should drastically shorten the loops)
f.append(t[index]) #append factor to list
if n > 1:
f.append(n) #add last factor...
return num, f, f'count optimization: {count}'
Which I compared to the code with the most votes, which was very fast
def prime_factors2(n):
i = 2
factors = []
count = 0 #added to test optimization
while i * i <= n:
count += 1 #added to test optimization
if n % i:
i += 1
else:
n //= i
factors.append(i)
if n > 1:
factors.append(n)
return factors, f'count: {count}' #print with (count added)
TESTING, (note, I added a COUNT in each loop to test the optimization)
# >>> prime_factors2(600851475143)
# ([71, 839, 1471, 6857], 'count: 1472')
# >>> prime_factors(600851475143)
# (600851475143, [71, 839, 1471, 6857], 'count optimization: 494')
I figure this code could be modified easily to get the (largest factor) or whatever else is needed. I'm open to any questions, my goal is to improve this much more as well for larger primes and factors.
如果您想使用 numpy,这里有一种方法可以创建一个包含不大于 n 的所有素数的数组:
[ i for i in np.arange(2,n+1) if 0 not in np.array([i] * (i-2) ) % np.arange(2,i)]
Check this out, it might help you a bit in your understanding.
#program to find the prime factors of a given number
import sympy as smp
try:
number = int(input('Enter a number : '))
except(ValueError) :
print('Please enter an integer !')
num = number
prime_factors = []
if smp.isprime(number) :
prime_factors.append(number)
else :
for i in range(2, int(number/2) + 1) :
"""while figuring out prime factors of a given number, n
keep in mind that a number can itself be prime or if not,
then all its prime factors will be less than or equal to its int(n/2 + 1)"""
if smp.isprime(i) and number % i == 0 :
while(number % i == 0) :
prime_factors.append(i)
number = number / i
print('prime factors of ' + str(num) + ' - ')
for i in prime_factors :
print(i, end = ' ')
This is my python code: it has a fast check for primes and checks from highest to lowest the prime factors. You have to stop if no new numbers came out. (Any ideas on this?)
import math
def is_prime_v3(n):
""" Return 'true' if n is a prime number, 'False' otherwise """
if n == 1:
return False
if n > 2 and n % 2 == 0:
return False
max_divisor = math.floor(math.sqrt(n))
for d in range(3, 1 + max_divisor, 2):
if n % d == 0:
return False
return True
number = <Number>
for i in range(1,math.floor(number/2)):
if is_prime_v3(i):
if number % i == 0:
print("Found: {} with factor {}".format(number / i, i))
The answer for the initial question arrives in a fraction of a second.
Below are two ways to generate prime factors of given number efficiently:
from math import sqrt
def prime_factors(num):
'''
This function collectes all prime factors of given number and prints them.
'''
prime_factors_list = []
while num % 2 == 0:
prime_factors_list.append(2)
num /= 2
for i in range(3, int(sqrt(num))+1, 2):
if num % i == 0:
prime_factors_list.append(i)
num /= i
if num > 2:
prime_factors_list.append(int(num))
print(sorted(prime_factors_list))
val = int(input('Enter number:'))
prime_factors(val)
def prime_factors_generator(num):
'''
This function creates a generator for prime factors of given number and generates the factors until user asks for them.
It handles StopIteration if generator exhausted.
'''
while num % 2 == 0:
yield 2
num /= 2
for i in range(3, int(sqrt(num))+1, 2):
if num % i == 0:
yield i
num /= i
if num > 2:
yield int(num)
val = int(input('Enter number:'))
prime_gen = prime_factors_generator(val)
while True:
try:
print(next(prime_gen))
except StopIteration:
print('Generator exhausted...')
break
else:
flag = input('Do you want next prime factor ? "y" or "n":')
if flag == 'y':
continue
elif flag == 'n':
break
else:
print('Please try again and enter a correct choice i.e. either y or n')
Since nobody has been trying to hack this with old nice reduce
method, I'm going to take this occupation. This method isn't flexible for problems like this because it performs loop of repeated actions over array of arguments and there's no way how to interrupt this loop by default. The door open after we have implemented our own interupted reduce
for interrupted loops like this:
from functools import reduce
def inner_func(func, cond, x, y):
res = func(x, y)
if not cond(res):
raise StopIteration(x, y)
return res
def ireducewhile(func, cond, iterable):
# generates intermediary results of args while reducing
iterable = iter(iterable)
x = next(iterable)
yield x
for y in iterable:
try:
x = inner_func(func, cond, x, y)
except StopIteration:
break
yield x
After that we are able to use some func
that is the same as an input of standard Python reduce method . Let this func
be defined in a following way:
def division(c):
num, start = c
for i in range(start, int(num**0.5)+1):
if num % i == 0:
return (num//i, i)
return None
Assuming we want to factor a number 600851475143, an expected output of this function after repeated use of this function should be this:
(600851475143, 2) -> (8462696833 -> 71), (10086647 -> 839), (6857, 1471) -> None
The first item of tuple is a number that division
method takes and tries to divide by the smallest divisor starting from second item and finishing with square root of this number. If no divisor exists, None is returned. Now we need to start with iterator defined like this:
def gener(prime):
# returns and infinite generator (600851475143, 2), 0, 0, 0...
yield (prime, 2)
while True:
yield 0
Finally, the result of looping is:
result = list(ireducewhile(lambda x,y: div(x), lambda x: x is not None, iterable=gen(600851475143)))
#result: [(600851475143, 2), (8462696833, 71), (10086647, 839), (6857, 1471)]
And outputting prime divisors can be captured by:
if len(result) == 1: output = result[0][0]
else: output = list(map(lambda x: x[1], result[1:]))+[result[-1][0]]
#output: [2, 71, 839, 1471]
In order to make it more efficient, you might like to use pregenerated primes that lies in specific range instead of all the values of this range.
You shouldn't loop till the square root of the number! It may be right some times, but not always!
Largest prime factor of 10 is 5, which is bigger than the sqrt(10) (3.16, aprox).
Largest prime factor of 33 is 11, which is bigger than the sqrt(33) (5.5,74, aprox).
You're confusing this with the propriety which states that, if a number has a prime factor bigger than its sqrt, it has to have at least another one other prime factor smaller than its sqrt. So, with you want to test if a number is prime, you only need to test till its sqrt.
def prime(n):
for i in range(2,n):
if n%i==0:
return False
return True
def primefactors():
m=int(input('enter the number:'))
for i in range(2,m):
if (prime(i)):
if m%i==0:
print(i)
return print('end of it')
primefactors()
Another way that skips even numbers after 2 is handled:
def prime_factors(n):
factors = []
d = 2
step = 1
while d*d <= n:
while n>1:
while n%d == 0:
factors.append(d)
n = n/d
d += step
step = 2
return factors
n=int(input("Enter the number"))
if n==1 : #because the below logic doesn't work on 1
print(n)
for i in range(2 , n+1):
if n%i==0 :
n1=i #get factor
for b in range(2,n+1): #check if it is prime
if ((n1%b)==0) & (n1==b):
print(n1)
elif (n1%b)==0 or n1<b: #if not then pass
break
i am sure this is the worst logic but it's all the knowledge i have in .py this program will get a number from user and prints all of it's factors numbers that are prime like for 12 it will give 2,3
The technical post webpages of this site follow the CC BY-SA 4.0 protocol. If you need to reprint, please indicate the site URL or the original address.Any question please contact:yoyou2525@163.com.