I am experiencing extremely bizarre behavior where variables are randomly changing. I have distilled it to the simplest example, encoder_1_position a ...
I am experiencing extremely bizarre behavior where variables are randomly changing. I have distilled it to the simplest example, encoder_1_position a ...
I am looking at implementing USB communication on a MCU which has a USB engine built into it. Basically you have access to the pipes/endpoints. I am ...
I am having an issue configuring my SAM3x8e port to output, when I check the pin with a multimeter I get 1.5V so the pin 0 of Port A just isn't turnin ...
I had a question about adding a new machine in Yocto. I am trying to add both a new layer in Yocto, and a new machine. The machine is based on Atmel ...
I seem to be reiterating this question from here and here. When I reboot my system after flashing firmware onto an opposing flash bank, the VTOR is 0 ...
I'm working on an Arduino Due, trying to use DMA functions as I'm working on a project where speed is critical. I found the following function to rece ...
I am developing a Project over a Arduino Due Board(ATSAM3X), I am using Atmel Studio7, and ASF. I would like to know how to read a flash memory block/ ...
I am new to Atmel Studio. I created new GCC C Execute project with ATSAMV71Q21 device. In main.c file added printf then run build and got bunch of "un ...
I am using the Atmel SAM3x8E micro-controller and trying to do a simple LED toggle when I press a button. I am using pull-up configuration button to t ...
I am starting to use an Arduino Due for some project work which requires a UART and am confused by what looks like an interaction between UART interru ...
Occasionally I will get an unexpected interrupt, and my code will hang inside Dummy_Handler() in exceptions.c of the Atmel Studio Framework (ASF). I a ...
I am new to arduino (as a matter of fact to programming). I am thinking to use arduino due for my academic projects. While going through it's datashee ...