I'm developing a product using a Movesense sensor. But I don't have a Movesense programmer. Currently, I'm using the DFU method to update the latest f ...

When requested for eeprom chip's information with asyncGet(WB_RES::LOCAL::COMPONENT_EEPROM_EEPROMINDEX_INFO(), AsyncRequestOptions::Empty, eepromIndex ...

I am developing an Android app that gets data from Movesense using the GATT profile from the sample app GATT Sensor Data App here. I followed the tuto ...

I'm trying to implement a bias calibration procedure in the Movesense device using the Logbook to record data from IMU6, but I'm having trouble in dec ...

C++ development and related evironments are not something I use so I might be missing som knowledge in this area. I want to do som sensor programming ...

measured standard deviation of the Acceleration signal from the Movesense HR+ sensor collected by the MS showcase app is the same at 1666Hz sample fre ...

I'm trying to set DataLogger Config to start measuring but get error 400. Don't have problems reading config or starting DataLogger. But since setting ...

I have tried to follow the instructions from Movesense on how to do Whiteboard communication using ADB. This does not work as expected. On a sidenote ...

I am reusing the following piece of code hr_wakeup app. counter = counter + LED_BLINKING_PERIOD; I have enabled Level 4 logs and I see the followin ...

I have a movesense device with the programming jig. I can connect to the jig using j-link, I can program/firmware update the device, but I can-not co ...

I'm working with Movesense 2.0.0 on a HR+ sensor and I have to minimize the power consumption when device is not worn. I can't turn it completely off ...

I'm working with Movesense 2.0.0 on a HR+ sensor and the latest MDSlib for Android. I have an App that calls my custom WB services to download some da ...

Movesense allows to set up waking up from a heartbeat via /Component/MAX3000x/WakeUp. But I couldn't find what uint8 values are available and what the ...

I try to programm an App for the Movesense Device and tried to rebuild the code which is on their official homepage. The Problem ist that the App is c ...

I tried to configure a bonding pincode on my Movesense 2.0.0 sensor and I was expecting being asked for it when trying to connect to the sensor with M ...

I'm trying to port the code I wrote on simulator on a HR+ sensor, and I'm facing an issue I didn't have on simulator. The code tries to write a quite ...

I'm working with Movesense 2.0.0 on a HR+ sensor, and I'm having this issue: if I subscribe (internally) to connector state changes it works as expect ...

I'm working with Movesense 2.0.0 on Simulator, and I'm implementing my own APIs. This is (part of) my YAML with the API specification And this is t ...

I'm trying to supply to Movesense Simulator (2.0.0 - VS2017) ECG data from a CSV file that looks like the following: But it looks like a random(but ...

I am trying to build the simulator for movesense using the link hereenter link description here. I get the following error: ...