I am trying to get an RFID-Reader (PN532) to work with a display, so it is shown there, who has scanned his RFID-Card. The problem I ran into was, tha ...
I am trying to get an RFID-Reader (PN532) to work with a display, so it is shown there, who has scanned his RFID-Card. The problem I ran into was, tha ...
I add a text a 390-characters long text record to 1k Mifare Classic card, I can write it successfully, but records are empty when reading it. I use ND ...
I am having a bit of trouble reading an NFC card with an ESP32 (using Arduino IDE). I'm using PN532 module, which works pretty well. So far my code lo ...
I am trying to use the PN532 to read my NFC UID from phone(Samsung Galaxy S10), but i receive just 08 and another 3 digits of random values.I read tha ...
I am interested in integrating the RFID1356MIFARE with the ESP32-EVB and using it as a card reader over UART. Basically reading UIDs, writing commands ...
I am trying to integrate an RFID1356MIFARE, which uses NXP PN532, with an ESP32-EVB using their UART capabilities. The NXP docs states that the PN532 ...
I want to send information from an Arduino to a phone via NFC. To do this I have a PN532 module. The way I want to send information is to use the mod ...
I've successfully connected PN532 to RPi using SPI. Communication works. I can read a passive tag using IN_LIST_PASSIVE_TARGET. Commands like GET_FIRM ...
I am using a raspberry pi hooked up to an PN532 NFC to print out the following information from an Android phone. I was wondering if there is any w ...
i'm trying to understand how the InDataExchange Command is actually working. I'm using a pn532 component (I send this command to PN532 from a microcon ...
I bought this NFC Shield for my Arduino controller. https://www.reichelt.de/arduino-shield-nfc-v2-pn532-ard-shd-nfc-v2-p191287.html?PROVID=2788&g ...
I am trying to get the NFC shield working using SPI communication. I did follow all the instructions exactly as explained in Seeed Wiki - NFC Shield S ...
I want to emulate Elechouse PN532 NFC Module V3 as ISO/IEC 1443-4A card. I use Arduino Uno as a development board. I also downloaded their library fro ...
I am building a Windows/Java program (using javax.smartcardio) to communicate with Jewel/Topaz512 tags (from Innovision/Broadcom) using an ACR122U dev ...
I have been trying to detect an tag using the PN532 module that I bought from amazon here: https://www.amazon.ca/ASHATA-Controller-Raspberry-Interfac ...
I am trying to use a PN532 (v3) board with an Arduino UNO and libnfc for my university project. One problem I have stumbled upon is that libnfc-1.7.1 ...
I am using Arduino UNO with elechouse's library and a PN532 module connected through SPI. I am trying to emulate a card using the emulate_tag_ndef e ...
I am running an NFC Reader with an interrupt pin on my Raspberry Pi and I wrote a script to make it running. So far it works quite well but in some ca ...